OUR TOP 10 VAPING TIPS

 INVEST IN PREMIUM E-LIQUIDS

Investing in premium e-liquids can be a smart choice for several reasons:

1. Quality Ingredients: Premium e-liquids often use high-quality ingredients, including pharmaceutical-grade nicotine and food-grade flavorings. This can result in a more enjoyable vaping experience with smoother flavors and fewer potential health risks.
2. Consistency: Premium e-liquids are typically manufactured in controlled environments with strict quality control measures. This ensures consistency in flavor, nicotine strength, and overall product quality from batch to batch.
3. Unique Flavors: Premium e-liquid brands often offer a wide range of unique and complex flavors, catering to various preferences and tastes. Investing in premium e-liquids allows you to explore a diverse selection of flavors and find ones that suit your palate.
4. Safety and Compliance: Reputable premium e-liquid brands adhere to regulatory standards and undergo rigorous testing to ensure product safety and compliance with industry regulations. Investing in premium e-liquids from trusted brands can provide peace of mind regarding product safety and quality.
5. Enhanced Experience: Premium e-liquids may offer a more satisfying vaping experience compared to lower-quality alternatives. The use of high-quality ingredients and expert craftsmanship can result in smoother throat hits, richer flavors, and overall better performance from your vape device.

When investing in premium e-liquids, it’s essential to research reputable brands, read reviews from other vapers, and consider factors such as flavor preferences, nicotine strength, and PG/VG ratio. By investing in premium e-liquids, you can enhance your vaping experience and enjoy a higher quality product with confidence.

EXPLORE E-LIQUID FLAVOUR COMBINATIONS

Exploring e-liquid flavor combinations can be a fun and creative process that allows you to customize your vaping experience to suit your tastes. Here are some flavor combinations to consider:

1. Fruity and Menthol: Combine fruity flavors like strawberry, watermelon, or mango with a hint of menthol or mint for a refreshing and cooling vape experience.
2. Dessert and Tobacco: Mix dessert flavors such as vanilla custard, caramel, or chocolate with a touch of tobacco for a rich and indulgent vaping experience with a hint of smokiness.
3. Citrus and Tropical: Blend citrus fruits like lemon, lime, and orange with tropical flavors such as pineapple, coconut, or passionfruit for a bright and exotic vape experience.
4. Bakery and Fruit: Combine bakery flavors like cinnamon roll, sugar cookie, or cheesecake with fruity accents like blueberry, raspberry, or peach for a sweet and satisfying vaping experience reminiscent of your favorite desserts.
5. Coffee and Cream: Mix coffee flavors such as espresso or cappuccino with creamy notes like vanilla, caramel, or hazelnut for a smooth and decadent vaping experience that mimics your favorite coffeehouse drinks.
6. Candy and Soda: Combine candy flavors like gummy bears, cotton candy, or bubblegum with soda-inspired flavors such as cola, lemon-lime, or cherry for a nostalgic and sweet vaping experience reminiscent of your favorite childhood treats.
7. Spice and Fruit: Add a touch of spice with flavors like cinnamon, ginger, or clove to complement fruity flavors such as apple, pear, or peach for a warm and flavorful vaping experience with a hint of complexity.

When exploring e-liquid flavor combinations, don’t be afraid to experiment and mix different flavors together to discover new and exciting combinations that appeal to your palate. Additionally, consider factors such as nicotine strength, PG/VG ratio, and overall flavor intensity to create a balanced and enjoyable vaping experience.

UNDERSTANDING ‘VG/PG’ RATIOS

Understanding VG/PG ratios is essential for selecting the right e-liquid for your vaping preferences. VG (Vegetable Glycerin) and PG (Propylene Glycol) are two primary ingredients in e-liquid, and their ratio determines several aspects of your vaping experience:

1. VG (Vegetable Glycerin):
   • VG is a thick, viscous liquid that produces dense vapor clouds when heated.
   • It contributes to the smoothness and sweetness of the vapor.
   • Higher VG ratios result in thicker vapor clouds and a smoother throat hit.
   • VG is known for its ability to produce thicker clouds and is favored by cloud chasers and direct-to-lung (DTL) vapers.
2. PG (Propylene Glycol):
   • PG is a thinner, less viscous liquid that carries flavor more effectively.
   • It provides a stronger throat hit and enhances flavor intensity.
   • Higher PG ratios result in a stronger throat hit and more pronounced flavor.
   • PG is commonly used in e-liquids for its flavor-carrying properties and throat hit.

Common VG/PG ratios include:

• High VG: VG/PG ratio of 70/30 or higher. Suitable for cloud chasing and DTL vaping.
• Balanced: VG/PG ratio of 50/50. Offers a balance between vapor production, flavor intensity, and throat hit.
• High PG: VG/PG ratio of 30/70 or lower. Provides a stronger throat hit and more pronounced flavor, suitable for mouth-to-lung (MTL) vaping.

When selecting an e-liquid, consider your vaping preferences and device compatibility:

• Cloud Chasing: Choose high VG e-liquids for dense vapor production.
• Flavor Intensity: Higher PG ratios enhance flavor intensity, while higher VG ratios provide smoother vapor.
• Throat Hit: Higher PG ratios offer a stronger throat hit, while higher VG ratios result in a smoother throat hit.
• Device Compatibility: Some devices are better suited for specific VG/PG ratios, so ensure compatibility with your vaping setup.

Experimenting with different VG/PG ratios allows you to customize your vaping experience and find the perfect balance of vapor production, flavor, and throat hit that suits your preferences.

LOOKING AFTER YOUR E-LIQUID

Properly caring for your e-liquid ensures that it maintains its quality and flavor for an enjoyable vaping experience. Here are some tips for looking after your e-liquid:

1. Store Properly:
   • Keep e-liquids stored in a cool, dark place away from direct sunlight and heat sources.
   • Exposure to sunlight and heat can degrade the nicotine and flavorings in e-liquid, so storing them in a cool environment helps preserve their quality.
2. Seal Bottles Tightly:
   • Ensure that e-liquid bottles are tightly sealed when not in use to prevent exposure to air.
   • Exposure to air can lead to oxidation, which may degrade the flavor and nicotine potency of the e-liquid over time.
3. Avoid Contamination:
   • Keep e-liquid bottles clean and free from contaminants, such as dust, dirt, or other foreign particles.
   • Contaminants can affect the flavor and quality of the e-liquid, so it’s essential to maintain cleanliness when handling e-liquid bottles.
4. Check Expiry Dates:
   • Pay attention to the expiry dates printed on e-liquid bottles.
   • Using expired e-liquid may result in diminished flavor and potency, so it’s best to use e-liquids within their recommended shelf life.
5. Shake Before Use:
   • Before filling your tank or dripper, give the e-liquid bottle a good shake.
   • Shaking helps ensure that the ingredients in the e-liquid are well-mixed, providing a consistent flavor and nicotine concentration with each vape.
6. Keep Away from Children and Pets:
   • Store e-liquids out of reach of children and pets to prevent accidental ingestion.
   • Nicotine-containing e-liquids can be toxic if ingested, so it’s crucial to store them safely to avoid any potential accidents.

By following these tips, you can maintain the quality and flavor of your e-liquid and enjoy a satisfying vaping experience with each use.

PLASTIC TANKS & E-LIQUIDS

When using e-liquids with plastic tanks, it’s essential to consider compatibility and potential risks. Here’s what you need to know:

1. Compatibility:
   • Some e-liquids may contain ingredients that are known to react with certain types of plastics, leading to cracking or clouding of the tank.
   • It’s crucial to check the compatibility of your e-liquid with your specific tank material. Most manufacturers will specify which types of e-liquids are safe to use with their tanks.
2. Tank Material:
   • Plastic tanks are typically made from materials such as polycarbonate (PC), polyethylene terephthalate glycol-modified (PETG), or polypropylene (PP).
   • Each type of plastic has its own level of resistance to different e-liquid ingredients. For example, polycarbonate tanks are more prone to cracking from certain flavors or acidic ingredients.
3. Avoid Certain Ingredients:
   • Some e-liquid ingredients, such as citric acid, cinnamon flavoring, or certain sweeteners, are more likely to react with plastic tanks.
   • To minimize the risk of damage to your plastic tank, avoid using e-liquids that contain these ingredients if your tank is made from a material that is susceptible to damage.
4. Regular Maintenance:
   • Regardless of the tank material, it’s essential to perform regular maintenance to ensure longevity and prevent potential issues.
   • Clean your tank regularly to remove any residue or buildup that may accumulate over time, which can degrade the tank material or affect the flavor of your e-liquid.
5. Consider Alternatives:
   • If you frequently use e-liquids that may be incompatible with plastic tanks or if you’re concerned about potential risks, consider using a tank made from glass or stainless steel.
   • Glass and stainless steel tanks are more resistant to damage from e-liquid ingredients and offer better longevity and performance.

Overall, while plastic tanks can be convenient and affordable, it’s essential to be mindful of compatibility and potential risks when using them with certain e-liquids. By understanding the limitations of plastic tanks and taking appropriate precautions, you can minimize the risk of damage and enjoy a safer vaping experience.

CLEAN YOUR TANK REGULARLY

Absolutely, regularly cleaning your tank is crucial for maintaining optimal performance, preserving flavor quality, and extending the lifespan of your vaping device. Here’s a simple guide to cleaning your tank:

1. Disassemble the Tank: Carefully disassemble your tank, separating the different components such as the tank itself, drip tip, base, and coil (if applicable).
2. Discard Remaining E-Liquid: Empty any remaining e-liquid from the tank into a sink or trash can. You can also use a paper towel to soak up any excess liquid.
3. Rinse with Warm Water: Rinse all tank components thoroughly under warm running water. This helps remove any leftover e-liquid residue, dirt, or debris from the tank.
4. Clean with Mild Detergent (Optional): For a deeper clean, you can use a mild dishwashing detergent or soap to clean the tank components. Gently scrub the tank parts with a soft brush or cloth to remove any stubborn residue.
5. Rinse Again: After cleaning with detergent, rinse the tank components again under warm water to remove any soap residue.
6. Dry Thoroughly: Shake off any excess water from the tank components and use a clean, lint-free cloth to dry them thoroughly. Ensure that all parts are completely dry before reassembling the tank.
7. Reassemble the Tank: Once the tank components are dry, reassemble the tank by putting the pieces back together in the correct order. Make sure all connections are secure and properly tightened to prevent leaking.
8. Prime the Coil (if applicable): If you’ve removed the coil during cleaning, make sure to prime it with e-liquid before reinserting it into the tank. This helps prevent dry hits and extends the life of the coil.
9. Refill with E-Liquid: Finally, refill the tank with your favorite e-liquid, ensuring not to overfill beyond the maximum fill line.

By following these steps and cleaning your tank regularly, you can maintain optimal performance, prevent flavor contamination, and ensure a satisfying vaping experience every time. Aim to clean your tank at least once a week or whenever you notice a change in flavor or vapor production.

CHECK BATTERY CONNECTIONS

Checking the battery connections on your e-cigarette is an important part of device maintenance to ensure proper functionality and safety. Here’s how you can check and maintain the battery connections:

1. Power Off the Device: Before inspecting the battery connections, make sure your e-cigarette is powered off to avoid any accidental activation.
2. Remove the Battery: If your device has a removable battery, carefully remove it from the device.
3. Inspect the Battery Terminals: Check the battery terminals (both on the battery itself and inside the device) for any signs of dirt, debris, or corrosion. Use a cotton swab lightly dampened with rubbing alcohol to gently clean the terminals if necessary. Be sure to allow the terminals to dry completely before reinserting the battery.
4. Check the Device Connections: Inspect the device’s connection points, including the threading and contact pins, for any dirt, debris, or damage. Use a clean, dry cloth or cotton swab to wipe away any residue and ensure a clean connection.
5. Reassemble and Test: Once the battery connections and device connections are clean and dry, reinsert the battery into the device and secure it properly. Power on the device and check for any signs of proper functionality, such as the display turning on or the device firing correctly.
6. Regular Maintenance: Make it a habit to periodically check and clean the battery connections on your e-cigarette, especially if you notice any issues such as inconsistent performance, battery drainage, or connectivity issues.

By regularly checking and maintaining the battery connections on your e-cigarette, you can help ensure safe and reliable operation, prolong the lifespan of your device, and reduce the risk of malfunctions or accidents.

CHANGE YOUR COIL REGULARLY

Absolutely, regularly changing your coil is essential for maintaining optimal performance and flavor in your vaping device. Here’s why and how often you should change your coil:

1. Coil Lifespan: Over time, the coil in your vaping device will degrade due to use, heat, and buildup of e-liquid residue. As the coil deteriorates, it can affect vapor production, flavor quality, and overall vaping experience.
2. Flavor Quality: A worn-out or burnt coil can negatively impact the flavor of your e-liquid, resulting in a muted or unpleasant taste. Changing your coil regularly ensures that you continue to enjoy the full flavor profile of your e-liquid.
3. Vapor Production: A degraded coil may struggle to produce sufficient vapor, leading to weak or inconsistent vapor production. By replacing the coil, you can restore optimal vapor production and enjoy a more satisfying vaping experience.
4. Prevent Dry Hits: As a coil wears out, it may become less efficient at wicking e-liquid to the heating element. This can result in dry hits, where the cotton wick burns instead of producing vapor. Regularly changing your coil helps prevent dry hits and prolongs the life of your vaping device.
5. Recommended Interval: The frequency at which you should change your coil depends on various factors, including the type of coil, your vaping habits, and the type of e-liquid you use. As a general guideline, coils typically last between 1 to 4 weeks before needing replacement. However, if you notice a decline in flavor or vapor production, or if you experience dry hits, it’s time to change your coil.

To change your coil:

• Disassemble your tank and remove the old coil.
• Prime the new coil by saturating the cotton wick with e-liquid.
• Install the new coil into the tank and reassemble the device.
• Allow the coil to soak in e-liquid for a few minutes before vaping to prevent dry hits.

By regularly changing your coil according to manufacturer recommendations and your vaping habits, you can maintain optimal performance and enjoy a consistently satisfying vaping experience

PRIME EVERY COIL

priming every coil before use is crucial for preventing dry hits, extending coil lifespan, and ensuring optimal performance. Here’s how to prime your coil properly:

1. Prepare the Coil: Before installing the coil in your tank, inspect it for any defects or damage. If the coil looks intact, gently screw it into the base of the tank.
2. Add E-Liquid: Apply a few drops of e-liquid directly onto the exposed cotton wick openings on the coil. Make sure to saturate the cotton thoroughly but avoid oversaturating to prevent flooding.
3. Wait for Absorption: Allow the coil to absorb the e-liquid for several minutes. This allows the cotton wick to become fully saturated and prevents dry hits when you start vaping.
4. Assemble the Tank: Once the coil is adequately primed, reassemble the tank by attaching the tank sections and ensuring all connections are tight and secure.
5. Fill the Tank: Fill the tank with your preferred e-liquid, being careful not to overfill beyond the maximum fill line.
6. Let it Sit: After filling the tank, let it sit for a few minutes to allow any air bubbles to escape and ensure proper wicking.
7. Start with Low Power: When using a new coil for the first time, start vaping at a lower power setting to break in the coil gradually. Slowly increase the power as needed to reach your desired vaping experience.

By following these steps and priming every coil before use, you can prolong coil lifespan, prevent dry hits, and enjoy optimal flavor and vapor production from your vaping device. Remember to prime each new coil, as well as coils that have been unused for an extended period, to ensure the best vaping experience.

HAVE MULTIPLE TANKS

Having multiple tanks for your vaping device can offer several benefits and conveniences, especially for vapers who enjoy using different e-liquids or prefer various vaping experiences. Here are some reasons why having multiple tanks can be advantageous:

1. Flavor Variety: With multiple tanks, you can switch between different e-liquids and flavors without the need to empty and clean your tank each time. This allows you to enjoy a wider variety of flavors throughout the day.
2. Convenience: Having multiple tanks pre-filled with different e-liquids eliminates the need to carry bottles of e-liquid with you when you’re on the go. You can simply swap out tanks to change flavors quickly and easily.
3. Customization: Different tanks may have unique features, such as adjustable airflow or coil compatibility, allowing you to customize your vaping experience to suit your preferences.
4. Backup Options: If one tank malfunctions or needs maintenance, having a backup tank ensures that you can continue vaping without interruption. This is particularly useful for vapers who rely on their device for nicotine replacement or smoking cessation.
5. Experimentation: Having multiple tanks allows you to experiment with different coil types, resistance levels, and vaping styles. You can test new coils or vaping techniques without affecting your primary tank setup.
6. Special Occasions: You may reserve specific tanks for special occasions or certain e-liquids that you only vape on certain occasions. This helps keep those flavors fresh and enjoyable for when you want them.
7. Sharing with Friends: If you vape with friends or family members, having multiple tanks allows you to share your device without sharing e-liquids. Each person can have their tank filled with their preferred flavor.

Overall, having multiple tanks can enhance your vaping experience by providing flexibility, convenience, and customization options. Whether you’re looking to switch flavors easily, experiment with different setups, or simply have backup options, having multiple tanks can be a valuable addition to your vaping setup.

MOST IMPORTANTLY – EXPERIMENT AND HAVE FUN

Absolutely! Experimenting and having fun with vaping is one of the most enjoyable aspects of the hobby. Here are a few ways you can experiment and make vaping an even more enjoyable experience:

1. Try New Flavors: Explore different e-liquid flavors and brands to find ones that you love. Don’t be afraid to step out of your comfort zone and try something new and exciting.
2. Mix Your Own E-Liquids: Consider experimenting with DIY e-liquid mixing to create custom flavor combinations tailored to your preferences. You can purchase flavor concentrates and base liquids to mix at home and create unique blends.
3. Test Different Coil Setups: Experiment with different coil types, resistances, and configurations to find the perfect balance of flavor, vapor production, and throat hit for your vaping style.
4. Explore New Devices: If you’ve been using the same vaping device for a while, consider trying out new devices with different features, designs, and capabilities. You may discover a device that better suits your needs and preferences.
5. Attend Vape Events: Attend vape conventions, expos, or meetups in your area to connect with other vapers, learn about new products, and participate in fun activities and competitions.
6. Share Your Experience: Share your vaping journey with friends, online communities, or social media platforms. Engage in discussions, share tips and tricks, and inspire others with your vaping experiences.
7. Stay Informed: Keep up to date with the latest vaping news, regulations, and trends to stay informed and educated about the vaping community and industry.

Remember, vaping is all about enjoyment and personalization. Don’t be afraid to experiment, try new things, and have fun along the way. Whether you’re chasing clouds, exploring new flavors, or simply enjoying the sensation of vaping, embrace the experience and make it your own.